Magnetic Drive Waterfall Pumps
These high volume magnetic drive pumps are durable, reliable and energy-efficient. Their power and simplicity of operation make them the perfect choice for many water gardening applications, especially waterfalls.

• One year warranty
• Uses up to 40-60% less electricity then direct drive pumps
• No seals, no oil
• 1 ½ “ FNPT discharge
• 1 ½ “ MNPT suction
• 20’ power cord
• 1 ½" up to 2" adapter included

Low Profile Magnetically Coupled Waterfall Pumps
These high volume magnetic drive pumps are durable, reliable and energy-efficient. Their power and simplicity of operation make them the perfect choice for many water gardening applications. Features:

• Ceramic Shaft
• No seals- no oil
• PLP2000/PLP3000 have 1-1/2" intake/discharge
• PLP5000/PLP8000 have 2" intake/discharge
• Discharge accomodates NPT fittings
• Includes snap on pre-filter
• PLP2000/3000/5000 have 20' power cord
• PLP8000 has 40' power cord
• UL listed
• 1 year warranty

• Dual purpose submersible or in-line applications below water level
• Unique flow-through water cooling- uses no oil for environmental safety
• Safe, lightweight and long-lasting- built with non-corrosive materials
• Durable capacitor start motor for low energy consumption
• Stainless Steel handle for easy installation & service
• 1 year warranty
• 20' cord on models T1500 & T4000
• 40' cord on models T7500 &T10000
• 1" intake and discharge on T1500
• 1.5" intake and discharge on T4000
• 3" intake and discharge on T7500 & T10000

Stainless Steel and Bronze Pumps
Our longtime customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. Five different models with flow rates from 225 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a two-year warranty and will provide trouble free use in freshwater, saltwater or chlorinated water (3-5ppm). You can even use it in hot water up to 110°F!

 

Features & Benefits:

 

Large Magnetic Drive Pond Pumps
The most exciting of the new technologies available for light-duty applications is known as a magnetic drive, or wet-rotor pump. All electrical components in these units are completely sealed in a non-toxic plastic resin. The impeller is mounted on a magnet that is chased around in circles by electrical charge from the sealed motor. It's a safe, efficient product for light-duty freshwater or saltwater applications.

Features & Benefits:

• Three year warranty
• Use in or out of water
• Ceramic shaft for longevity
• Only one moving part for long life and better performance
• 20’ power cord for convenience
• Non-corrosive plastic housing
• P 600, P900, & P1500 models have a 1” NPT intake and discharge
• UL listed for consumer confidence

Models P600/900/1500 have 1"NPT intake & discharge.
Model P1500 comes with optional 1-1/2" adapters

Magnetic Drive Fountain & Pond Pumps
From small statuary to tabletop displays, the magnetic drive fountain and pond are ideal for these types of applications. Their design makes them energy efficient and easy to maintain. Repair kits featuring magnets and impellers are available for all models. All Models feature a three warranty giving you a reliable and safe pump. These magnetic drive pumps have pumping capacities of 80 gph up to 300 gph.

 

Features & Benefits:

• Three year warranty
• Stainless steel or ceramic shaft for longevity
• Non-corrosive plastic housing
• Only one moving part for long life and better performance
• All models shown here are equipped with a flow adjuster
• P300 can be used submerged or in open air below water level
• UL listed for consumer confidence

Model P80. 1/2" discharge

Model P140. 1/2" discharge

Model P220. 1/2" slip discharge & includes 1/2" pre-chamber with filter and 1/2" connector

Model P300. 3/4" MNPT & includes 3/4" pre-chamber & 3/4" barbed hose connector

CFS170T
1" FNPT

TS1.5
1-1/2" Filter Screen
1-1/2"FNPT
3-1/2" Length, 5" Diameter

TS3.0
3" Filter Screen
3" FNPT
5" Length, 7" Diameter

TF10
Fitting-Tube-Adapter
1" and 1-1/2" FNPT
12" Length
2" Diameter